Fixing Platinum Cure Silicone Issues with Silicone Additives
Posted on
Last Updated
Fixing Platinum Cure Silicone Issues with Silicone Additives
THANK YOU to TIBS from Fantasy Grove for helpful research! Check them out on Twitter at https://twitter.com/GroveFantasy.
There are a bunch of additives that you can add to your silicone to change the properties… whether you want it thicker, thinner, or you want to change the curing time… there’s an additive for that!
You can check out this video as well as all of our other videos on YouTube. Or you can check out our other videos: here
We love sharing our experience and knowledge so we thought we’d show how we make silicone toys. There are a lot of videos out there that don’t show the best practices or don’t make safety a priority.
We make silicone sculptures (aka “adult toys”) for guys, gals, and non-binary pals!
LinkTree: https://linktr.ee/amavidi (everything is here!)
Patreon: https://patreon.com/amavidi
Twitter: https://twitter.com/amavidi
Subscribe if you like what you see – https://www.youtube.com/@Amavidi?sub_confirmation=1
Check out our website too! https://www.amavidi.com/
Recommended playlist: Quickies https://www.youtube.com/watch?v=yAEhf5OgM3I&list=PLzaVWvv_S9FF47bWp-cRJwkwSR2r5Tb7x
=============
Smooth-on – EcoFlex 00-30 (Extra Soft) – https://amzn.to/3CgZ5D3
Smooth-on – EcoFlex 00-50 (Soft) – https://amzn.to/3wcIgXR
Smooth-on – DragonSkin 10 (Medium) – https://amzn.to/3CdwpuA
Smooth-on – DragonSkin 20 (Firm) – https://amzn.to/35rNqpc
Smooth-on – DragonSkin 30 (Extra Firm)- https://amzn.to/3CfqpBz
Smooth-on – Silc-Pig pigments – https://amzn.to/3pFXqln
Mold Release – Mann 200 – https://amzn.to/3vFSIb6
Vacuum Pump – Robinair 15310 – https://amzn.to/3HOqCNb
Vacuum Chamber – 3 Gallon – https://amzn.to/3HDSSSF
Pint Mixing cups – https://amzn.to/3pEdswb
Quart Mixing cups – https://amzn.to/3vKbUVc
Mixing Sticks (large) – https://amzn.to/3vEBTNP
Mixing Sticks (small) – https://amzn.to/3MnBGoe
Smooth-on XTC-3D – https://amzn.to/3Ch046d
=============
